Build A Moving Reindeer Tag Ornament

Hello everyone today we are going to make a Reindeer Tag Ornament for C.C. Designs. This can be given as a gift tag, ornament and a card. The action part will be the reindeer’s hands going up and down to send Holiday Greetings.

You will need the the following products from C.C. Designs: 
- New Make A Reindeer Die Set and the 
- Tags Galore Die Set
- Pull Tab Metal Die Set

Cut all of the pieces from the Make A Reindeer Die Set with 2 extra of the full shape reindeer.Cut out the main pull tab of the Pull Tab Metal Die Set and 1 of the 2nd largest tag from  the Tags Galore Die Set.
Cut 2 of the full reindeer 1/3 of the way from the ends on both sides of the head as shown in the image. Cut the same to pieces along the waste for the legs. This will create a canal for the pull tab to go as pictured. You can use clear acetate so it does not show on the top of the tag.

Glue the pieces of the reindeer body to the main reindeer cutout. Glue the ends of the hands to the bottom ends of the Pull Tab Die. You will glue the cut pieces of the reindeer to the tag with the pull tab in between the 1/3 head pieces to able to move up and down. 

Once the Reindeer is adhered to the tag you can embellish the reindeer with the die cuts from the set. Add the hole tab for the tag and string with twine or ribbon. On the final piece I used an acetate pull tab. Thank you for joining us for this quick moving tag tutorial. All of the products used on this project are now in the C.C. Designs website.

Products used on this project:
- New Make A Reindeer Die Set and the 
- Tags Galore Die Set
- Pull Tab Metal Die Set

Thank You
Amador